Products / NTDS/ATDS

Swift-PAK™ cPCI NTDS Serial D/E

VERSATILE DUAL PMC CARRIER FOR 6U CPCI SLOTS

Use PMCs to build powerful, high density CPCI systems while conserving slot space

Family of PMC Carriers

IXI’s 6U Compact PCI (cPCI) Carrier is one of a number of PMC carriers in the PMC family. The PMC family of PMC carriers adapt PCI Mezzanine Cards (PMCs) to a variety of bus architectures including Compact PCI (cPCI), VME, VME64, VME64x, PCI, and PCI Express (PCIe). PMCs combine the electrical characteristics of the PCI bus with the mechanical dimensions of the Common Mezzanine Card (CMC) format, resulting in a small daughter card that can be mounted in industry standard PMC sites to add system features, increase computing power, or increase I/O channel density.

6U CPCI Dual PMC Carrier

The 6U cPCI Carrier hosts two PMC cards and supports 32 or 64-bit operation at 33 or 66 MHz. The PMCs are connected to an onboard secondary PCI bus which is transparently bridged to the offboard primary bus making both PMCs visible to the cPCI system. VIO for the PMC sites can be set for 3.3 or 5.0 VDC signaling.

Rear I/O capability (optional)

In addition to normal front I/O, the 6U cPCI Carrier also features the ability to make rear I/O connections. Userdefined I/O signals from each PMC site pass through the cPCI backplane on connectors J3 and J5, which mate with the optional Rear Transition Module (RTM). Signals are routed to two industry standard PMC I/O Module (PIM) sites on the RTM. PIMs provided by the PMC vendor are mounted on the RTM to provide the final connection point. Up to 64 bits of I/O are supported for each PMC.

Hot swap capability

Basic Hot Swap and Full Hot Swap are supported, enabling the orderly insertion or extraction of boards without adversely affecting a running system. When used with an operating system that supports hot swap, a blue Hot Swap LED illuminates when extraction is permitted and the card can be safely removed.

Gigabit ethernet controller (optional)

The 6U cPCI Carrier can be configured with two optional Gigabit Ethernet Controllers, which provide two network interfaces for 10/100/1000 Mb/s full- and halfduplex operation. The two ports are accessible via rear I/O using the optional Rear Transition Module only.

Product Overview

• 6U cPCI carrier board with sites for two PMCs
• Supports 32 or 64-bit operation at 33 or 66 MHz
• Full hot swap capability, PICMG 2.1 R2.0 compliant
• Status LED for Hot Swap (blue)
• Front or rear panel I/O support for PMC sites
• Selectable 3.3V or 5V PCI signaling for PMC sites
• Supports universal (3.3V or 5V) signaling on the cPCI
backplane
• Two Gigabit Ethernet controllers accessible through
rear I/O (optional)

6U cPCI Specifications

cPCI Interface

PICMG 2.0, version 3.0 compliant

cPCI Form Factor

6U Eurocard (160 mm by 233 mm)

PMC Site Interface

• Dual PMC sites
• IEEE P1386.1 compliant
• PMC on CompactPCI, PICMG 2.3
• R1.0 compliant
• Selectable 3.3V or 5V PCI signaling
• IEEE P1386-2001 compliant VIO
• keying
• 32 or 64-bit operation
• 33 or 66 Mhz operation

PMC Site Form Factor

IEEE P1386 Single Size CMC
(149 mm x 74 mm)

Rear I/O Connections*

Wired per PICMG 2.3 Rev 1.0
Up to 64 bits of user-defined I/O
for each PMC
Dual 10/100/1000BASE-T

Hot Swap

PICMG 2.1 R2.0 compliant
Blue Hot Swap LED

Ethernet Ports (optional)

Dual RJ-45 10/100/1000BASE-T*

Weight

8 oz (unpopulated)

Power Consumption**

+3.3 VDC @ 2.9A

Relative Humidity

5% to 95% (non-condensing)

Operating Temperature

0°C to +55°C
* Available only when Carrier and RTM are used together
** Power Consumption based on unpopulated carrier with onboard
Ethernet controllers. Actual consumption will vary depending on PMC
module power requirements.

Rear Transition Module Specifications

cPCI Interface

PICMG 2.0 CompactPCI
specification, version 3.0 compliant
Vita 36 – 199X Draft Rev 1.0
compliant

cPCI Form Factor

6U CompactPCI RTM carrier board
with sites for two PMC I/O Modules
(PIMs)

PIM Site Form Factor

69 mm x 74 mm

Rear I/O Connections

Up to 64 bits of user-defined I/O†
Dual RJ-45 10/100/1000BASE-T‡

Relative Humidity

5% to 95% (non-condensing)

Operating Temperature

0°C to +55°C
† Requires matching PIM from the PMC vendor; Connection scheme is
specified by the vendor
‡ Available only when Carrier is configured with onboard Ethernet controller
(see Model Numbers)

Type Title
Data Sheet Download
Manual Request Login
Software Request Login

Model Numbers

SC-04103-00 NTDS Serial Type E 3U cPCI Module w/4K FIFO
SC-04104-00 NTDS Serial Type E 3U cPCI Module w/64K FIFO
SC-04101-00 NTDS Serial Type E 6U cPCI Module w/4K FIFO, Single Channel
SC-04101-01 NTDS Serial Type E 6U cPCI Module w/4K FIFO, Dual Channel
SC-04102-00 NTDS Serial Type E 6U cPCI Module w/64K FIFO, Single Channel
SC-04102-01 NTDS Serial Type E 6U cPCI Module w/64K FIFO, Dual Channel

Accessories

CA-01058-XX NTDS Serial Type D Coax, UPL20-2 to UPL20-2 Cable Set*
CA-EA03U-XX NTDS Serial Type D Coax, UPL20 to UPL20 Cable Set*
CA-01001-XX NTDS Serial Type E Triax, PL74-7 to PL74-7 Cable Set*
CA-00119-XX NTDS Serial Type E Triax, PL74-7 to BJ89-7 Cable Set*
CA-00158-XX NTDS Serial Type E Triax, PL74-32 to PL155-32 Cable Set*
CA-EA04U-XX NTDS Serial Type E Triax, PL80-7 to PL80-7 Cable Set*
AN-ST013-00 NTDS Serial Type D Serial Isolation Tap
AN-ST012-00 NTDS Serial Type E Serial Isolation Tap
* Contact factory for length
Request a Quote