ATDS/NTDS, Data Input and Output ( I/O) Devices & Translation

NTDS SERIAL D/E PCI

Overview
Specifications
Download
Ordering Info

PCI NTDS Serial Type D and E

The PCI NTDS Serial Type D and E interface provides a communications bridge between commercial computers with PCI slots, and military computers and peripherals using MIL-STD-1397C Type D for their communications with other devices.

  • Product Overview
    • Fully MIL-STD-1397C Type D or E compliant
    • Full-duplex 32-bit NTDS transfers
    • Interrupt, PIO & DMA operation
    • Independent NTDS sink and source channels
    • Field Programmable Gate Array (FPGA) technology
    • Separate word counters and time-outs for command and
    data words on inputs and outputs
    • PCI Master and Slave operation
    • Internal loopback test without disconnecting NTDS cables
    • Software enabled SIF (for NTDS type E)
    • Software enabled time stamp on input words with 125ns
    resolution
    • Time stamps can be synchronized across multiple interfaces
    • Front panel indicator LEDs, including two softwarecontrollable
    user LEDs
    • Supports receipt of multiple forced command words
    • Control frame programmability for MIL-STD-1397
    compatibility
    • Software compatible with Serial Swift PMC and Swift cPCI
    boards
General Product Features
  • Input Mode Features
    • Separate or combined data and command word buffers
    • Input command words, stop on data word
    • Input data words, stop on command word
    • Single word or burst mode (NTDS type E)
    • Passive tap mode
  • Output Mode Feature
    • Concurrent data and command buffer operation
    • Single word or burst mode (NTDS type E)
  • Time-out Mode Features
    • Time-out values in 10μs or 1ms increments
    • Time-out between words and/or total transfer times
    • Start time-out at beginning of operation or upon transfer
    of the first word
  • Software Drivers Available*
    • Choice of driver included with board purchase:
    Windows NT® Windows® XP, VxWorks®, Solaris™,
    Linux®, LynxOS®, HP-UX
    *Contact factory for new OS support
  • Options and Accessories
    • Cable Assemblies
    • Tap Accessories
PCI NTDS Serial Type D and E Technical Specs
  • NTDS Interface
    MIL-STD-1397C Type D or E
  • PCIbus Interface
    PCI 2.2 Compliant 32-Bit, 33/66 MHz, Universal Card (3.3V or 5V I/O signaling)
  • Input Buffer
    64K x 32-bit FIFO
  • NTDS I/O Connector
    Type D: 2 coaxial connectors (Amphenol# 31-10-75)
    Type E: 2 tri-axial connectors (Trompeter# CBBJR79T L)
  • Form Factor
    6.875” x 4.2” (Standard PCI Short Card)
  • Weight
    4.8 oz – Type D
    4.8 oz – Type E
  • Power Consumption
    Average +5V current draw: 0.85A
    Average +VI/O current draw: 5mA
    Average Power Dissipated: 2.89W
  • Relative Humidity
    0% to 90% (non-condensing)
  • Operating Temperature
    0°C to +55°C
  • Model Numbers
  • SW-04101-00
    NTDS Serial Type E PCI Module w/4K FIFO
  • SW-04102-00
    NTDS Serial Type E PCI Module w/64K FIFO
  • SW-03101-00
    NTDS Serial Type D PCI Module w/4 FIFO
  • SW-03102-00
    NTDS Serial Type D PCI Module w/64 FIFO
Accessories
  • CA-01058-XX
    NTDS Serial Type D Coax, UPL20-2 to UPL20-2 Cable Set*
  • CA-EA03U-XX
    NTDS Serial Type D Coax, UPL20 to UPL20 Cable Set*
  • CA-01001-XX
    NTDS Serial Type E Triax, PL74-7 to PL74-7 Cable Set*
  • CA-00119-XX
    NTDS Serial Type E Triax, PL74-7 to BJ89-7 Cable Set*
  • CA-00158-XX
    NTDS Serial Type E Triax, PL74-32 to PL155-32 Cable Set*
  • AN-ST013-00
    NTDS Serial Type D Serial Isolation Tap
  • AN-ST012-00
    NTDS Serial Type E Serial Isolation Tap
  • * Contact factory for length
Request a Quote

ONLINE QUOTE REQUEST FORM

Complete the form below in order to obtain a quote from IXI
Technology. Required fields are indicated by an asterisk (*).

Product Pricing & Delivery OnlyTechnical Information Needed (Explain Below)Product Data Sheets Needed