ATDS/NTDS, Data Input and Output ( I/O) Devices & Translation

NTDS ABCH PCIe

Overview
Specifications
Download
Ordering Info

A high-performance NTDS interface for PCI Express

NTDS for a new generation of PCIe bus servers and workstations

The NTDS Interface PCIe NTDS Parallel card connects computers with PCI Express (PCIe) slots to military computers and peripherals with MIL-STD-1397C Type A, B, C or H interfaces. The NTDS Interface PCIe is compatible with x1, x2, x4, x8 or x16 PCIe slots, allowing it to be used in the widest range of servers and workstations. NTDS cable connections are backward compatible with IXI’s NTDS Interface PCI board, allowing an easy upgrade to the PCIe version without the need to change cabling.

IXI’s NTDS Interface is easy to program and offers a variety of input and output modes to support any NTDS protocol. Hardware-independent input and output channels allow the NTDS Interface to perform simultaneous input and output (full duplex) operations. NTDS type is software-selectable allowing quick reconfiguration without the use of hardware jumpers or switch settings.

NTDS Interface boards can be used for passive tap applications as well as normal NTDS I/O. An on-board time stamp generator tags individual input words with 125 ns resolution. Time stamping is software-selectable and can be used with active or passive communications.

All boards in the NTDS Interface family are softwarecompatible making it easy to mix parallel and serial NTDS boards in the same system as well as allowing transparent migration of applications between PCIe, PCI, PMC, cPCI, and PC/104-Plus versions of the NTDS Interface. Device driver software is available for the most commonly-used operating systems.

For maintenance and reliability, PCI NTDS Parallel Interface boards feature short-circuit protection to prevent failures due to improper cabling or NTDS type mismatches. An internal loop-back path allows the NTDS Interface to be tested without disconnecting cables. The NTDS Interface can be updated in the field by reconfiguring its Field Programmable Gate Array (FPGA) logic to add features or compensate for non-compliant interfaces. Using FPGA technology reduces component obsolescence, enabling the NTDS Interface to be deployed and supported for years to come.

  • Product Overview
    • MIL-STD-1397C Type A, B, C, and H compliant
    • Full-duplex 8-, 16- or 32-bit NTDS transfers
    • Interrupt, PIO, and DMA operation
    • Independent NTDS input and output channels
    • Field Programmable Gate Array (FPGA) technology
    • Separate word counters and time-outs for EI/EF words and data words on inputs and outputs
    • Short-circuit protected, tri-state drivers
    • Internal loopback test without disconnecting NTDS cables
    • Software enabled time stamp on input words with 125ns resolution
    • Time stamps can be synchronized across multiple interfaces
    • Supports receipt of multiple Forced EFs
    • Software compatible with NTDS Interface Parallel PCI, cPCI, and PMC boards
General Product Features
  • Input Mode Features
    • Separate or combined data and command word buffers
    • Input command words, stop on data word
    • Input data words, stop on command word
    • Passive tap mode
  • Output Mode Feature
    • Concurrent data and command buffer operation
  • Time-out Mode Features
    • Time-out values in 10μs or 1ms increments
    • Time-out between words and/or total transfer times
    • Start time-out at beginning of operation or upon transfer of the first word
  • Software Drivers Available*
    • Choice of driver included with board purchase:
    -Windows® XP, Windows® Vista, Windows® 7, VxWorks®, Solaris™, Linux®, LynxOS®, HP-UX, FreeBSD
    *Contact factory for new OS support
  • NTDS Connector Compatibility
    • Connector compatible with NTDS Interface PCI Parallel NTDS board
NTDS Interface PCIe NTDS Parallel Technical Specs
  • NTDS Interface
    MIL-STD-1397C Parallel
    Types A, B, C or H
  • PCIe Bus Interface
    PCI Express Base Specification,
    Revision 1.0a
  • Input Buffer
    64K x 32-bit FIFO
  • NTDS I/O Connectors
    Rear Bezel: 112 Pin Receptacle (Berg
    50295-5112E)
    Top Edge: Dual 80 pin high density
    ribbon cable headers
  • Form Factor
    Standard height, half length PCIe
    4.20” X 6.6” (106.7mm X 167.65mm)
  • Weight
    6.3 oz., 7.0 oz. with top edge connectors
  • Power Consumption
    Average power consumption: 4.956W
    Average +3.3V current draw: 0.92A
    Average +12V current draw: 0.16A
  • Temperature
    Operating: 0°C to +56°C
    Storage: -41°C to +71°C
  • Shock
    MIL-STD-810F, method 516.4,
    procedure VI (bench handling)
  • Vibration
    Random: 20-200Hz/0.01 g²/Hz Sine
    Peak: 5-28Hz/1g
  • Relative Humidity
    0% to 95% (non-condensing)
  • Altitude
    Operating: 15,000 ft.
    Storage: 26,250 ft.
  • MTBF
    >140,000 hours calculated per
    MIL-HDBK-217F @ 30 degrees C,
    ground benign
Standard or low profile, half-length PCIe - for that variant in form factor
  • With standard profile faceplate:
    4.13” X 6.6” (104.9mm X 167.65mm)
  • With low profile faceplate:
    2.53” X 6.6” (64.26mm X 167.65mm)
  • Model Number
  • SE-02102-01
    NTDS A/B/C/H, 64K FIFO, Standard, Low Power
Accessories
  • TB-11280-00
    † Cable Interface Module, 112 pin Berg to dual 80 pin ribbon, standard length
  • TB-11280-04
    † Cable Interface Module, 112 pin Berg to dual 80 pin ribbon, mini length
  • AM-SW012-00
    80 pin ribbon to M28840 (92 pin) recpt.
  • AM-SW018-00
    80 pin ribbon to M81511 (85 pin) receptacles
  • AM-SW013-00
    80 pin ribbon to D38999 (79 pin) receptacles
  • CA-28840-XX
    M28840 (92 pin) Cable Set**
  • CA-81511-XX
    M81511 (85 pin) Cable Set**
  • CA-38999-XX
    D38999 (79 pin) Cable Set**
  • CA-SW080-XX
    80 pin Ribbon Cable Set**
  • TK-11278-00
    Tap Cable Kit (connects to taps below)
  • AN-BT511-00
    NTDS Parallel Isolation Tap, M81511
  • AN-BT840-00
    NTDS Parallel Isolation Tap, M28840
  • AN-BT999-00
    NTDS Parallel Isolation Tap, M38999
  • AN-PT000-00
    Universal NTDS Parallel Breakout Box
  • TB-12080-10
    Cable Interface Module, 120-Pin HD to 2x80-Pin
  • TB-120120-00
    Cable Interface Module 120-PIN HD to 120-Pin Molex
Request a Quote

ONLINE QUOTE REQUEST FORM

Complete the form below in order to obtain a quote from IXI
Technology. Required fields are indicated by an asterisk (*).

Product Pricing & Delivery OnlyTechnical Information Needed (Explain Below)Product Data Sheets Needed